The quality of your end product can never be better than the quality of the mixture!
Because the preparation process is separate from the transportation of the mixture during the process, it is possible to vary the speed of the mixing tool (and therefore the power input into the mixture) within broad limits. The mixing tool can run at variable speeds - from fast to slow. This allows the power input into the mixture to be adapted to the specific mix. It also enables "hybrid" mixing processes, such as slow – fast – slow.
The advantages for the mixed product:
- Higher tool speeds can be used for example to
- optimally solubilize fibers
- completely pulverize pigments
- optimize mixing of fine fractions
- manufacture suspensions with a high solid content
- Medium tool speeds are used to
- achieve mixtures with a high mixture quality
- At lower tool speeds
- lightweight additives or foams can be gently added to the mixture
The advantages for production:
- The rugged design guarantees outstanding service life and high reliability
- Wear elements are easily accessible and therefore easily exchangeable
- The seals are not in direct contact with the product
Feedback from Eirich customers confirms:
- Materials of all types and consistency can be processed quickly and at high quality
- Improved distribution of additives
- Waste is significantly reduced
- Levels of wear are significantly lower
- Availability of the system is greatly increased
Granulating technology, pelletizing technology
Our granulating and pelletizing mixers perform mixing and granulating/pelletizing in a single machine.
Eirich has comprehensive know-how in granulating and pelletizing technology. Our intensive mixers are designed as granulating and pelletizing mixers which produce predictable and reproducible grain sizes. Just one machine is needed to carry out the two process steps: mixing and granulating/pelletizing. The entire process can be performed in a normal atmosphere and in a vacuum. Service-proven machines are available for the classical build-up pelletizing of fine-grain materials and powdery materials.
Our machines are used mainly in the following fields:
- Ceramics: Molding compounds, molecular strainers, proppants, varistor compounds, dental compounds, cutting ceramics, grinding agents, oxide ceramics, grinding balls, ferrites, etc.
- Building materials: Porosity agents for bricks, expanded clay, pearlite, etc.
- Glass: Glass powder, carbon, lead glass mixtures, etc.
- Metallurgy: Zinc and lead ore, aluminum oxide, silicon carbide, iron ore, etc.
- Agricultural chemistry: Lime hydrate, dolomite, phosphate fertilizer, peat fertilizer, mineral compounds, sugar beet seeds,etc.
- Environmental protection: Cement filter dusts, fly ash, slurries, dusts, lead oxide, etc.
The quality of your end product can never be better than the quality of the mixture!
In contrast to other mixing systems, the throughput rate and mixing intensity of Eirich intensive batch mixers can be adjusted independently of each other.
- The mixing tool can run at variable speeds from fast to slow
- This allows the power input into the mixture to be adapted to the specific mix
- Hybrid mixing processes are made possible e.g. slow – fast – slow
- Higher tool speeds can be used for example to:
- optimally solubilize fibers
- completely pulverize pigments, optimize mixing of fine fractions
- manufacture suspensions with a high solid content
- Medium tool speeds are used to achieve mixtures with a high mixture quality
- At low tool speeds, lightweight additives or foams can be gently added to the mixture
The mixer mixes without separating the mixture; 100 % material agitation during each revolution of the mixing pan. Eirich intensive batch mixers are available in two series with a usable volume ranging from 1 to 12,000 liters.
- Mixers with a usable volume between 1 and 12,000 liters
- Mixers with a usable volume of 1 / 5 / 10 liters (laboratory mixers)
- Mixers with a tilting mixing pan
- Mixers with a mixing pan cover which folds open
The quality of your end product can never be better than the quality of the mixture!
In contrast to other mixing systems, the throughput rate and mixing intensity of Eirich continuous intensive mixers can be adjusted independently of each other.
In the process,
- the variable rotating speed of the mixing tools
- the variable rotating speed of the mixing pan
- the exact adjustment of the material dwell period during the mixing process
offer particular advantages for the overall result. Even during startup of the mixing processes, the system ensures that no material which is unmixed or only partially mixed leaves the mixer.
Eirich continuous intensive mixers are available in two series with a usable volume ranging from 75 to 12,000 liters.